FRP Industrial Water Softener for Water Purifier

Prod Model:	YL-I-4
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Control Mode:	Flow Rate Type, Time Type
Resin:	001×7 Strong Acidic Cation-Exchange
Working Ambient Temperature:	5-50centigrade
Relative Humidity:	Less Than 95%(25centigrade)
Hardness Of Raw Water:	Less Than 8mmol/L
Hardness Of Effluent:	Less Than 0.03mmol/L
Inlet Water Pressure:	0.2 to 0.4MPa
Free Chlorine:	Less Than 0.3mg/L
Suspended Solid:	Less Than 0.5mg/L
Iron Content:	Less Than 0.3mg/L
Composition:	Water Treatment Equipment
Process:	Thermal Processing
Processing Material:	Resin

Product Description

Product name:

Water Softening Plant for household bathroom 





What is hard water?
When water is referred to as 'hard' this simply means, that it contains more minerals than ordinary water. These are especially the minerals calcium and magnesium. The degree of hardness of the water increases, when more calcium and magnesium dissolves.
Magnesium and calcium are positively charged ions. Because of their presence, other positively charged ions will dissolve less easily in hard water than in water that does not contain calcium and magnesium.
This is the cause of the fact that soap doesn't really dissolve in hard water.




Which industries attach value to hardness of water?
In many industrial applications, such as the drinking water preparation, in breweries and in sodas, but also for cooling- and boiler feed water the hardness of the water is very important.
 



What is water softening?
 
When water contains a significant amount of calcium and magnesium, it is called hard water. Hard water is known to clog pipes and to complicate soap and detergent dissolving in water.
Water softening is a technique that serves the removal of the ions that cause the water to be hard, in most cases calcium and magnesium ions. Iron ions may also be removed during softening.
The best way to soften water is to use a water softener unit and connect it directly to the water supply.
 

What is a water softener?
A water softener is a unit that is used to soften water, by removing the minerals that cause the water to be hard.
 


Why is water softening applied?
Water softening is an important process, because the hardness of water in households and companies is reduced during this process.

When water is hard, it can clog pipes and soap will dissolve in it less easily. Water softening can prevent these negative effects.

Hard water causes a higher risk of lime scale deposits in household water systems. Due to this lime scale build-up, pipes are blocked and the efficiency of hot boilers and tanks is reduced. This increases the cost of domestic water heating by about fifteen to twenty percent.

Another negative effect of lime scale is that it has damaging effects on household machinery, such as laundry machines.

Water softening means expanding the life span of household machine, such as laundry machines, and the life span of pipelines. It also contributes to the improved working, and longer lifespan of solar heating systems, air conditioning units and many other water-based applications.



Working principle
01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.



Technical parameters:

Single tank fluid ,	model	water output (M 3 /Hour)	dimension of can diameter*height (mm)	salt box (L)	consumption on resin (KG)	Connecting pipe(inch)
	YL-I-0.5	0.5	200×1200	60	25	3/4
	YL-I-1	1	250×1400	60	25	1
	YL-I-2	2	300×1400	100	50	1
	YL-I-3	3	350×1650	200	75	1
	YL-I-4	4	400×1800	200	100	1.5
	YL-I-5	5	500×1850	200	150	1.5
	YL-I-6	6	600×1850	200	200	1.5
	YL-I-10	10	750×2400	350	350	2
	YL-I-16	16	900×2400	1000	600	2
	YL-I-20	20	1000×2400	1500	700	3
	YL-I-28	28	1200×2400	2000	1000	3
	YL-I-50	50	1500×2400	2000	1500	3

 


Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.



Control mode of fully automatic water softener
(1) Single tank time type: It adopts microcomputer to control the time, when operation of the equipment reaches setting time, it will automatically enter the regeneration condition, which can be regenerated for once a day or once for some day.
(2) Single tank flow type: It adopts control of turbine flow or electronic flow sensor, when the yield of softener reaches preset flow it will automatically enter the regeneration condition, which can be recycled many times every day.
(3) Double tanks flow type: Which could be divided into one running-one alternating, and simultaneous running and separately regeneration.
(4) One running and the other alternation type: One tank is running while the other is alternating, when water yield of operating tank reaches the preset flow rate, it will enter the regeneration stage, meanwhile, the other tank will enter the working state, these two tanks work and regenerate alternatively to realize continuous water supplying of 24 hours.
(5) Simultaneous running and separately regeneration type: Two cans running simultaneously, when the flow rate reaches the setting rate, one tank (can) will regenerate and the other tank will output water continuously, when the first regeneration tank finish the regeneration it will enter the working stage, the other one will enter regeneration stage, these two cans finish regeneration and enter working state simultaneously.