| Prod Model: |
AK2006H |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Size:685 * 300 * 220mm: |
Guarantee 3 Years |
| Installation: Brakcet Or Wall-Mounted: |
Cover: Fireproof ABS |
| Start Mode: |
IR Inductive |
| Heating Principle: |
Heating Wire |
| Shell Material: |
Fireproof ABS |
| Wind: |
Cold/Warm Choose |
| Installation: |
Free Standing |
| Drying Time: |
10 Seconds |
| Certification: |
CE CB EMC LVD, with CB Test Report |
| Air Speed: |
65m/S, 95m/S Controlled Via Switch |
Product Description
BRUSHLESS MOTOR, lifetime 7 to 10 years.
Wind speed: 95m/s or 65m/s (SWITCH control)
Do vento SPEED: 95m / s ou 65m / s
220-240V 50/60Hz
650 - 2050 W
76 dBA
11kg
Guarantee 3 years
Unit size: 685 * 300 * 220mm
Carton size: 730 * 370 * 290mm
Each cardboard is Covered with strong plastic membrane to Protect the hand dryers.
A 20 "ft container load: 390 pieces
HOW IT WORKS
First, the jet hand dryer must be mounted onto the wall in the desired facility and then can either be plugged into an outlet or hardwired by an electrician.
All the user needs to do is insert their hands into the gap and slowly pull them out while the screen counts down the seconds. It works in just 10 seconds - completely removing water from the palms and backs of the hands by means of two discharges of air on either side. Hands will be completely dry, with no hand rubbing or turning required. The built-in heater facilitates an immediate release of warm air to speed up the hand drying process while the waste water is stored in a tank for easy and convenient disposal.
It's Quick! And it's that easy.
HOW IT IS INSTALLED
It is installed with a bracket at the back side, so it's really easy!
HIGH SPEED
Hands feel dry in as little as 10 seconds
The powerful discharge of air on either side of the hand leaves moisture dripping and hands dry.
The release of warm air from the built-in heaters helps speed up the hand drying process.
SANITARY & CLEAN
It works automatically and does not require any contact with the hands.
Waste water is collected in drain tank, the floor and surrounding surfaces stay clean and dry.
It eliminates the need to use paper towels, so the room stays cleaner and tidier as a result of eliminated paper waste.
ECONOMICAL
It uses only 650W of power (up to2050W with setting on HIGH and heater ON) compared to other hand dryers that typically require around 2400W.
Over 75% cost saving vs. Paper towels.
The short drying time uses minimal energy compared to other hand dryers.
BRUSHLESS MOTOR (no carbon)
Brushless motor hand dryer (or we say no carbon hand dryer) lifetime 7 to 10 years, will not make any pollution to the air, don't make any tiny dust.
While brush motor lifetime no more than 3 years, it will produce tiny carbon powders when running, which is not good for the clean air, NEVER been allowed in electronics workshops, pharmacy workshops, foodstuff workshops, etc.
STRONG PACKAGE
Each unit is packed with strong plastic membrane, so the product can hardly get broken during transportation.
|
model |
motor |
RPM |
guarantee |
motor power |
heating power |
total power |
unit size |
1 unit package size |
|
AK2006H |
DC brushless motor |
20, 000 |
3 years for motor, 1 year for whole units |
750W |
900-1300W |
1650-2050W |
68.5*30*22cm |
73*37*29cm |
|
air speed |
net weight |
gross weight |
ying hands time |
Low speed / High speed switch |
ON/OFF switch |
Hot air / cold air switch |
rated voltage |
air temperature |
|
95m/s 65m/s |
11KG |
13KG |
10 seconds |
YES |
YES |
YES |
100-130V or 220-240V, 50/60HZ |
20 - 40 degree |
AIKE is one of the best-known brands in hand dryer industry. It is the leading producer and marketer of hand dryer. Today, AIKE have exported hand dryers over 100 countries and this figure is continuing to rise. It has the biggest factory over 25, 000 square meters modernized workshops in the world, the monthly output is more than 10, 000. The hand dryer developed by the Company are sold through online stores, wholesalers and distributors around the globe. Whereas, AIKE is not the sort of company to live on its past glories; Instead it looks to the future as a challenge and constantly seeks new markets and ways of increasing its market share in areas where it currently has a strong presence.
Just 16 years ago, AIKE is only known in China hand dryer industry, and it just accessed American, Europe and Southeast Asia markets. Now however, AIKE has become a well established hand dryer product for thousands of new consumers throughout the world. Today, the challenge facing us is to establish successful connecting to our global consumers. We've been asked by a lot of people how we've grown so quickly, and the answer is actually really simple...We've aligned the entire organization around one mission: To provide the best hand dryer service possible.
AIKE is absorbed in provide best hand hygiene solution and aim to create high efficiency eco-friendly, healthy products. Our guiding philosophy has LED to the development of whole industry innovations. We focus on the design, innovation and customer experience. High rate R & D investment is far greater than competitors. AIKE possess 15 experienced engineers and more than 21 patent right and this number is rapid growth every year.
The world is changing all around us. To continue to thrive as a business over the next ten years and beyond, we must look ahead, understand the trends and forces that will shape our business in the future and move swiftly to prepare for what's to come. Whatever, we will carry on strive for creating a healthy, clean and Eco-friendly world environments.
