Dry Heat Aseptic (Eliminating Heat Source) Oven (sterilizing machine)
| Price: |
US $ 15000-30000/Piece |
| Trade Terms: |
FOB,CFR |
| Min Order: |
1/Piece |
| Pay Type: |
L/C,T/T |
| Prod Model: |
GM100C |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Material: |
SUS304 |
| Control: |
PLC+Touch Screen |
| Inerface: |
Muli-Language |
| Max Temperature: |
250 Degrees |
| Filter: |
High Effection Filter |
| Structure: |
Oven |
| Operational Method: |
Continuous |
| Heating Mode: |
Dielectric |
| Movement Way: |
Combined |
| Operation Pressure: |
No Pressure |
| Type Of Atomization: |
None |
| Sprayer: |
None |
Product Description
This dry heat sterilizer is use for pharmaceutical instruments, tools, clothes' sterilization. It is widely used in pharmaceutical, chemical, food industries.
1. Drying oven is aseptic under the temperature of 250ºC, thus proving a reliable guarantee for elimination of heat source.
2. Drying temperature is controlled by designed program or PLC and temperature at two internal points will be recorded automatically.
3. High efficiency air filters are mounted at both air inlet and outlet to prevent the outside from polluting the inside of oven.
4. Internal circulating hot air is filtered through high temperature and high efficiency air filter(HEPA), thus guaranting that the hot air entering into effective space will reach grade 100 in clean requirement.
5. No dead corners and sharp edges exist in its interior. The surface of its outside wall is passivity as low gloss and the surface of its internal wall be polished accurate.
6. GMP verification interface should be retained on the sterilization machinery.
7. The Main technical datum of drying oven is for reference. We also produce and design product as per customers' requirement.
We are professional drying oven manufacturer. In "GMP" management the GM100 Series Drying Heat Aseptic oven filled up the blank in the state.
Model | Working temp(ºC) | Overall dimension(mm) | Clean air pressure of fan(at 250ºC) | Clean air pressure of fan(at 250ºC) | Laminar purifying grade | Heating power(kw) | Controlled tem error | Temp difference between points |
| GM-I | 20-250 | 1950x1300x2000 | 1500 | 700 | 100 | 15 | ≤2ºC | ≤3ºC |
| GM-II | 20-250 | 1950x2150x2000 | 3000 | 700 | 100 | 24 | ≤2ºC | ≤3ºC |
Senko Industry is a comprehensive company involved in five branch business since 2007, details as below:
1. Produce school presentation boards, like whiteboards, chalkboards, blackboards, notice boards, cork boards, etc.
2. Produce writing surface materials for whiteboards and chalkboards, like porcelain enamel whiteboard steel, porcelain ceramic chalkboard steel, ceramic steel, writing steel, whiteboard surface materials, whiteboard steel coil, prepainted steel for whiteboards, resin coated whiteboard steel, resin coated green chalkboard steel, etc.
3. Produce decoration materials for interior wall, exterior wall, ceilings
Interior wall: Drywall plasterboard, magnesium oxide board, drywall studs and tracks, joint tapes, drywall screws, ready-mixed joint compound etc.
Exterior wall: Fiber cement board, calcium silicate board, cement siding board, cement cladding board, fiberglass mesh, etc.
Ceilings system: Gypsum ceiling, mineral fiber ceiling, mineral wool ceiling, ceiling grids, etc.
Sandwich board: Roofing sandwich panel, MGO EPS sandwich panel, Cement board EPS sandwich panel, FRP sandwich panel, HPL sandwich panel, etc.
4. Invest in researching and developing hot steam sterilizer, passed ISO9001, ISO12384 & CE. The main products are rotatory super water sterilizer, super water sterilizer, pulsating vacuum sterilizer, washing sterilizer ampoule leak sterilizer, etc. It meet the needs of pharmaceuticals, hospital, food, biotechnology for different products. We can provide DQ, IQ, OQ, PQ, FAT & SAT documents for vertification. Meanwhile, we can design & manufacture the special requested products for customers. Installation, testing, GMP conformation & staff training also can be supplied.
5. Develop plastic & rubber products for industries.
Including PU foam products, PU casted products, like PU buffer, hose tube; Acrylic tubes, acrylic sheets, etc.
